COMPRESSION TESTING MACHINES - HAND OPERATED. (FOUR PILLAR MODELS.)

image

COMPRESSION TESTING MACHINES - HAND OPERATED. (FOUR PILLAR MODELS.)


As Per IS 516 - 1959.

For determination of compression strength of cement by testing concrete cylinders, cubes etc.

* Welded Four Pillar Load Frame.
* Piston (Ram) & Cylinders are duly Hard Chromed.
* Platens are hard chromed.
* The machine is equipped with Hand pump.
image
COMPRESSION TESTING MACHINES - HAND OPERATED FOUR PILLAR MODEL. 250 KN.
  • Order Code: AIC-CTMH-PL25T.
  • Add To Enquiry Box

It has capacity of 250 KN. The Dial of Pressure Gauge is Graduated from 0 to 250 KN with a least count of 1.25 KN.

image
COMPRESSION TESTING MACHINES - HAND OPERATED FOUR PILLAR MODEL. 500 KN.
  • Order Code: AIC-CTMH-PL50T.
  • Add To Enquiry Box

It has capacity of 500 KN. The Dial of Pressure Gauge is Graduated from 0 to 500 KN with a least count of 2.50 KN.

image
COMPRESSION TESTING MACHINES - HAND OPERATED. CHANNEL MODEL. 1000 KN.
  • Order Code: AIC-CTMH-CH100T.
  • Add To Enquiry Box



Can Test 50, 70.6, 100 & 150 mm Cubes and 150 mm Dia x 300 mm High Cylinders. It has capacity of 1000 KN. The Dial of Pressure Gauge is Graduated from 0 to1000 KN with a least count of 5 KN.

image
COMPRESSION TESTING MACHINES - HAND OPERATED. FOUR PILLAR MODEL. 1000 KN.
  • Order Code: AIC-CTMH-PL100T.
  • Add To Enquiry Box

It has capacity of 1000 KN. The Dial of Pressure Gauge is Graduated from 0 to 1000 KN with a least count of 5 KN.

image
COMPRESSION TESTING MACHINES - HAND OPERATED. FOUR PILLAR MODEL. 1500 KN.
  • Order Code: AIC-CTMH-PL150T.
  • Add To Enquiry Box

It has capacity of 1500 KN. The Dial of Pressure Gauge is Graduated from 0 to 1500 KN with a least count of 5 KN.

image
COMPRESSION TESTING MACHINES - HAND OPERATED. FOUR PILLAR MODEL. 2000 KN.
  • Order Code: AIC-CTMH-PL200T.
  • Add To Enquiry Box

It has capacity of 2000 KN. The Dial of Pressure Gauge is Graduated from 0 to 2000 KN with a least count of 10 KN.

Optional Accessories (If Required)

image
AIC-BTP-2040
  • Model Name: BRICK TESTING PLATENS. 200 mm W x 400 L x 10 mm T.
  • Add To Enquiry Box

An attached to test the bricks of blocks up to 180 mm width. (For 100/150/200 Tone Machines).