COMPRESSION TESTING MACHINES - ELECTRICALLY OPERATED. (FOUR PILLAR MODELS)
DOWNLOAD PDF
COMPRESSION TESTING MACHINES - ELECTRICALLY OPERATED. (FOUR PILLAR MODELS)
As Per IS 516 - 1959.
For determination of compression strength of cement by testing concrete cylinders, cubes etc.
>> Welded or Nut fitted Four Pillar Load Frame.
>> Piston (Ram) & Cylinders are duly Hard Chromed.
>> Platens are hard chromed.
>> The machine is equipped with facility for Hand pumping in case of power failure.
>> Micro Switch is incorporated inside the Pressure Gauge to shut off the motor automatically as the load approaches the rated capacity, which prevents it getting damaged due to over load.
>> Electrically Operated on 440 Volts, Three Phase.
Note : In case of special requirement, machines can be modified for 230V, Single Phase & 50Hz.
COMPRESSION TESTING MACHINES. ELECTRICALLY OPERATED. 1000 KN.
- Order Code: AIC-CTME-W100T.
- Add To Enquiry Box
It has capacity of 1000KN. The Dial of Pressure Gauge is Graduated from 0 to 1000KN with a least count of 5KN.
COMPRESSION TESTING MACHINES. ELECTRICALLY OPERATED. 250 KN.
- Order Code: AIC-CTME-W25T.
- Add To Enquiry Box
It has capacity of 250 KN. The Dial of Pressure Gauge is Graduated from 0 to 250 KN with a least count of 1.25 KN.
COMPRESSION TESTING MACHINES. WELDED. 4-PILLAR. ELEC/H.O. 500kN. 3-PHASE.
- Order Code: AIC-CTME-W50T.
- Add To Enquiry Box
It has capacity of 500 KN. The Dial of Pressure Gauge is Graduated from 0 to N 500 KN with a least count of 2.50 KN.
COMPRESSION TESTING MACHINES. ELECTRICALLY OPERATED. 1000 KN.
- Order Code: AIC-CTME-W100T.
- Add To Enquiry Box
It has capacity of 1000 KN. The Dial of Pressure Gauge is Graduated from 0 to 1000 KN with a least count of 5 KN.
COMPRESSION TESTING MACHINES. ELECTRICALLY OPERATED. 1500 KN.
- Order Code: AIC-CTME-W150T.
- Add To Enquiry Box
It has capacity of 1500 KN. The Dial of Pressure Gauge is Graduated from 0 to 1500 KN with a least count of 5 KN.
COMPRESSION TESTING MACHINES - ELECTRICALLY OPERATED. 2000 KN.
- Order Code: AIC-CTME-W200T.
- Add To Enquiry Box
It has capacity of 2000 KN. The Dial of Pressure Gauge is Graduated from 0 to 2000 KN with a least count of 10 KN.
COMPRESSION TESTING MACHINES - ELECTRICALLY OPERATED. 3000 KN.
- Order Code: AIC-CTME-W300T.
- Add To Enquiry Box
It has capacity of 3000 KN. The Dial of Pressure Gauge is Graduated from 0 to 3000 KN with a least count of 15 KN.
COMPRESSION TESTING MACHINES - ELECTRICALLY OPERATED. 3000 KN.
- Order Code: AIC-CTME-N300T.
- Add To Enquiry Box
It has capacity of 3000 KN. The Dial of Pressure Gauge is Graduated from 0 to 3000 KN with a least count of 15 KN. NUT Fitted Loading Unit. Ram Dia : 260mm.
COMPRESSION TESTING MACHINES - ELECTRICALLY OPERATED. 2000 KN. DOUBLE GAUGES.
- Order Code: AIC-CTME-W200T2.
- Add To Enquiry Box
It has capacity of 2000 KN. Having two Pressure Gauges. The Dials of Pressure Gauges are Graduated from 0 to 2000 KN with a least count of 10 KN and 0-1000 KN with a least count of 5 KN respectively.
COMPRESSION TESTING MACHINES - ELECTRICALLY OPERATED. 2000 KN. TRIPLE GAUGES.
- Order Code: AIC-CTME-W200T3.
- Add To Enquiry Box
It has capacity of 2000 KN. Having three Pressure Gauges. The Dials of Pressure Gauges are Graduated from 0 to2000 KN with a least count of 10 KN, 0 - 1000 KN with a least count of 5 KN and 0 - 500 KN with a least count of 5 KN respectively.
COMPRESSION TESTING MACHINES - ELECTRICALLY OPERATED. 3000 KN. TRIPLE GAUGES.
- Order Code: AIC-CTME-W300T3.
- Add To Enquiry Box
It has capacity of 3000 KN. Having three Pressure Gauges. The Dials of Pressure Gauges are Graduated from 0 to3000 KN with a least count of 15 KN, 0 to 2000 KN with a least count of 10 KN and 0 to 1000 KN with a least count of 5 KN respectively.
Optional Accessories (If Required)
AIC-BTP-2040.
- Model Name: BRICK TESTING PLATENS. 200 mm W x 400 L x 10 mm T.
- Add To Enquiry Box
An attachment to test the moulds, bricks or blocks up to 180 mm width.
Optional Accessories (If Required)
AIC-FTA-1015.
- Model Name: FLEXURAL TESTING ATTACHMENTS.
- Add To Enquiry Box
An attachment for testing flexure test using 10 x 10 x 50cm Beams and 15 x 15 x 70cm Beams.
Optional Accessories (If Required)
AIC-BTP-2040.
- Model Name: BRICK TESTING PLATENS. 200 mm W x 400 L x 10 mm T.
- Add To Enquiry Box
An attachment to best the bricks or blocks up to 180 mm width. (For 100/150/200 Tone Machines).